FixMyKite F-One 90 Degree One Pump MEGA Valve (suitable for Ozone One Pump)
Sold Out
  • SKU: VA0039-FLXL
  • Availability: Out of stock

FixMyKite F-One 90 Degree One Pump MEGA Valve (suitable for Ozone One Pump)


    Fix your Ozone kite with the FixMyKite F-One 90 Degree One Pump MEGA Valve with a 4" diameter Tear Aid Type A base.

    This product is functionally identical to the FixMyKite Ozone 90 Degree One Pump MEGA Valve.


    F-One 90 Degree One Pump MEGA-Patch Valve by FixMyKite is the perfect 'self-stick' replacement for leaking F-One kite leading edge valves. This valve is used on all F-One kites with a one-pump system and can be installed in under 5 minutes.

    Introducing the MEGA-PATCH with 77% more Tear-Aid!  Perfect for when you need to cut away your old valves or when you get a split in the bladder at the base of the existing valve.  The Mega-Patch eliminates the need to use an additional bladder patch before attaching your FixMyKite Self-Stick valve.  

    Our valves will stick on any Kite Bladder material, in any colour! Everything you need to install the new valve is included in the package, including an alcohol wipe and a link to detailed instructions.

    FixMyKite are the global benchmark in 'Self-Stick' valves, trusted everyday by professional repairers around the world.  When you buy a FixMyKite 'Self-Stick' valve you can be 100% confident you're  receiving an original F-One OEM valve backed by Tear-Aid and made by FixMyKite.


    1. Valve Removal: If replacing the valve, carefully peel off old valve. If old valve does peel off, cut around the circumference of the valve to remove
    2. Cleaning: Wipe area where the valve will be placed with a provided alcohol swab. DRY COMPLETELY WITH A CLEAN PAPER TOWEL.
    3. Peel and Stick: Lay bladder out flat. If possible, have a friend lightly hold bladder on a table or other smooth even surface. Peel off paper backing, center valve over hole, and place valve on bladder.
    4. Press: Press valve from center outward to remove air bubbles and ensure proper adhesion and creases.

    *Pro Tip - Use a hair dryer to heat the valve especially in cold weather. This makes it easier to remove the valve from the backing paper.  After placement of the self-stick valve use the hair dryer again to warm the adhesive. Press the valve from the centre out, massaging and stretching creating positive adhesion. Be careful not to overheat the bladder or new valve.  Following this method will guarantee your valve sticks in all conditions, and it really helps the Tear-Aid adhesive provide a permanent and lasting repair.