Products

Axis has introduced a carbon mast to its mast lineup in 2020. This means that they had to redesign the fuselage and consequently this "doodad" is required if you have...

Pick an Axis K Series 545 Carbon Front Wing, Axis K series Rear Wing, Axis *16mm Foil Mast and Fuselage to match the 16mm Base Plate, Mast Adapter 16mm "Doodad"...

The following are included in the K-Series Screw & Key Set: 2 x M8*35 Countersunk 316 grade Torx drive Stainless Steel screws 2 x M8*70 Countersunk 316 grade Torx drive...

Axis M8 Stainless 20mm Torx countersunk head screw x 4 As used on All Axis S Series hydrofoils

Set of 4 M8 x 25mm Torx head screws, normally used to mount the plate to the track, using slider nuts, or the front wing to the fuselage.

The following are included in the S-Series Screw & Key Set 2 x M8*35 Countersunk 316 grade Torx drive Stainless Steel screws 2 x M8*70 Countersunk 316 grade Torx drive...

Axis One Titanium Screwset and Toolset for All B-Series and S-Series The following are included in our All Black Series and S-Series Titanium Screw & Key Set: 2 x M8*35...

Axis PNG 910B Front Carbon Hydrofoil Wing The 910 PNG has been one of the most popular wings on the red fuselage. So we wanted to add it to the...

AXIS PNG Carbon Hydrofoil Front Wing Series The 850, 910, 910b, 1010, 1150, and 1300 form the Pump and Glide (PNG) series of high aspect front wings by AXIS. These wings are designed...

Introducing the ultimate pumping front wing. The Pump and Glide, PNG, 1310.The strength and stiffness of our AXIS Power Carbon and Power Carbon High Modulus Masts have opened up the...

The AXIS Progressive rear wings are all-round wings for intermediate and advanced riders and can be paired with Axis HPS, ART, BSC and PNG wings. Mostly flat but with a very subtle...

Protect your fuselage along with protecting your gear FROM your fuselage.Built with our tried and tested robust 600D and nylon construction. Reinforced edges keep your fuselage snug with a large...

The AXIS K-Series Fuselage is a 3D CNC cut anodized aluminium fuselage designed for the K-Series foils. AXIS K-Series Fuselage Standard Length is 657mmAXIS K-Series Fuselage Short Length is 626mm Compatible with...

AXIS Shim / Spacer Kit for Rear Wing Our stock setup with no shim is designed to work for the vast majority of riders. By popular demand here is a...

Axis Skinny 2023 Carbon Series Rear Hydrofoil wing     AXIS SKINNIES365/55, 362/50, 360/45 The development of the much faster-running ARTPRO wings prompted us to begin experimenting with reduced chord rear...

Axis T Nut Slider M8 Zinc plated brass each Replacement 8mm zinc plated brass T nut, that are strong enough and thick enough to support the loads that foil require...